Vibration Testing >> Air Cooled Series Vibration Test System >> TS-2-230
FEATURES
● 100% Air Cooled
● SineForceRange:100 kgf (220 lbf) to 7,000 kgf (15,400 lbf)
● Random Force to Sine Force Ratio 1:1
● Shock Force: Twice the Sine Force
● DisplacementPeak to Peak:25mm (1' ' ) or 40mm (1.6' ' ) or 51mm (2' ' )
● Lightweight, optimized armature
● Rotating Trunnion with Pneumatic Isolation
● Integral Payload Support
● Efficient Double Field Coil Design
● Low Magnetic Flux Leakage (MFL)
● Uniform Magnetic Field
● Remote cooling blower with silencer
● Air-cooled State-of-the-art Switching Amplifiers(Optionally available in integrated combo-base with slip table assembly)
Typical System Application
The TMC family of Air-Cooled Vibration Test Systems are well suited to test a wide range of products. Requiring no cooling water, air cooled shakers are easy to install and are widely used for commercial and military applications in the fields of aerospace, aviation, defense, watercraft, telecom, automotive, electronics, home appliances and more. With output force ratings from 100 kg to 7,000 kg peak force, these shakers are designed to provide continuous duty over a wide-band frequency range of up to 3000 Hz.Additional standard features include: integral payload support, rotating trunnion base with pneumatic isolation, 1:1 Sine to Random output force ratio and high fundamental armature resonance.All TMC Vibration Systems are built and tested in full compliance with ISO-5344.
| TS-2-230 Shaker Specifications |
|||||
| Measure | American | Metric | Measure | American | Metric |
| Sine(PK) | 440 lbf | 200 kgf | Random(RMS) | 440 lbf | 200 kgf |
| Shock(PK) | 880 lbf | 400 kgf | Usable Frequency | DC to 2500 Hz | |
| Maximum Displacement (p-p) |
1.6 inch | 40 mm | Maximum Velocity | 59.1 in/s | 150 cm/s |
| Maximum Acceleration | 25 g | Fundamental Resonance Frequency (Bare table) |
2700 Hz(nom.)±5% | ||
| Vertical Load Support | 308 lbs | 140 kg | Table Diameter | 9.1 inch | 230 mm |
| Body Suspension Natural Freq. | 3Hz | Armature Attachment Points | 17.6 lbs | 8 kg | |
| Load Attachment Points (Standard) |
17 stainless stell M8 Inserts (UNC option) | Stray Flux Density@6 inch (152mm)above table | ＜3 mT(30 gauss),but 1 mT(10gauss)by special design | ||
| Overall Dimentsions | 29.7"L*20.5"D*25.8"H | 754mml*520mmD*655mmH | Weight of Shaker (Uncrated) |
946 lbs | 430 kg |
| TA-2 Power Amplifier Specifications | B-200 Blower Specifications | ||||
| Rated Output Capacity | 2KA | Blower Power (Full Load) |
0.75KW(1HP)(Based on 380VAC,50Hz) | ||
| Signal to Noise Ratio | Greater than 65 dB |
Air Flow | 0.1m³/s(212CFM) | ||
| Amplifier Efficiency |
Greater than 90% |
Air Pressure | 1 kpa(0.15 PSI) | ||
| Interlock protection(to prevent the output devices from working outside their specified limits) |
·Logic Fault ·Over-Current ·Input Phase Loss ·Air Pressure ·Over-Voltage ·Over-Travel ·Control Power ·External Fault ·Input Under-Voltage ·Over-Temp(Field Coil and Driving Coil) |
Air Duct Length |
4m | ||
